You searched for bEuL - Tomorrows Technician
U of A Foundation Funds 174 2015-2016 Scholarship Awards

Thanks to the generous support of the University of the Aftermarket Foundation, 174 students pursuing automotive aftermarket careers will receive scholarships for the 2015-2016 academic year. “Thanks to the support of the entire industry, the University of the Aftermarket Foundation was able to award more scholarships this year to deserving students pursuing their aftermarket careers,”

2006 Jeep Wrangler: ATF Temp Sensor Code

In the new ATSG training seminar, out now from AVI, you will find a lot of great material that will help you out with your transmission needs.  With a 2006 Jeep Wrangler Wayne Colonna goes over a couple of ATF codes that you may just come across in this great tip clip from the seminar.   

Battery Drains Tech Tip

Parasitic drains can be measured with ammeters with the battery cable. Now the problem with taking the battery cable off to install the ammeter is that, sometimes electronic modules are the source of the parasitic draw. In this technical tip clip instructor Dave Hobbs talks about some other tricks for diagnosing these problems. He talks about the class two message monitor– a feature available on the Tech Two and also the Master Tech– it basically tells which module’s active and which module is inactive. He also goes on to cover using a parasitic draw tool in order to not disrupt the circuit while using an ammeter. Watch this clip to learn how to use the class two message monitor and or a simple knife switch that can actually be used for some neat tricks in diagnosing some stubborn, hard to find, parasitic battery drains.

Diesel Fuel Tips: Biodiesel, Ultra Low Sulfur: Benefits and Potential Problems

Watch this excerpt from the AVI training program on Ford 6.0 Powerstroke Diagnostics, taught by instructor Tony Salas, to gain insights and tips on diagnosing Biodiesel and Ultra low Sulfur fuel related problems on these engines.

Steering Angle Sensor Reset Tech Tip: Self Adjust Procedure Method

Watch this technical tip clip from instructor Dave Scaler’s comprehensive training program on Electronic Stability Control to learn more about performing a electronic stability control steering angle sensor reset or adjustment procedures and the limitations in resetting some cars based on what your scanner can do.

Toyota/Lexus – VSC (ESC) Tech Tip

In this technical tip clip from the Electronic Stability control training program, Dave Scaler talks about some tips and tricks to consider when working with ESC systems on Lexus vehicles. He discusses the reset procedures and the tips that you need in order to get those vehicles properly rest and on the road again.

Tech Tip: Sign of Low Refrigerant

Join Dave Hobbs of Delphi Product and Service Solutions as he discusses some signs of low refrigerant in moodier automotive AC systems. He goes on to discuss how environmental factors such as ambient air temperature, and the AC system’s ‘cycling switch can cause low refrigerant like symptoms.

2.4L Toyota Misfire Under Load Tech Tip

Bill Fulton presents this tip clip video on what would seem to be a basic, simple problem. A 2.4 liter Toyota in a Toyota Tacoma pickup truck with an intermittent misfire under load. You can feel a slight hiccup, jerking, bucking type sensation and know there are a lot of things that could create that problem– dirty injectors, contaminated mass airflow sensor, lean density misfire, excess of EGR, secondary ignition problem. Watch to find out.

Pass Lock System Status Tip Clip

Join instructor Bill Fulton in this tip clip excerpt from the AVI training program “GM Antitheft” as he talks about Pass Lock Systems Status and modes of operation of these systems.

Gen X & Y Advertising Strategy Tip Clip

Bill Haas outlines how to develop an advertising strategy for Generation Y in this tip clip from Marketing to Generation X & Y. Bill tells you what media works best to reach Generation Y and why traditional media doesn’t successfully reach them as it did previous generations.