Bar’s Leaks Tech Tips for Driving in a Winter Wonderland
Proper cooling system preparation helps prevent customers from getting stranded.
Powersports Tech Tips: CVT Tuning Part 1
Manufacturers like CVT transmissions for ATVs and UTVs because they are cheap and simple automatic transmissions. The CVT often gets a bad rap from users because the transmission doesn’t deliver the power how the user wants. Like stock suspension settings, the manufacturer is shooting for a middle-of-the-road approach that will function fairly well under a
Auto Body Tech Tips: Eliminating Sealer Creep
Many have eliminated the need for a wet-on-wet sealer by finishing off the 2K primer with a finer grit sandpaper, but sometimes it’s still prudent to seal a repair prior to refinishing. You don’t want to experience the dreaded “sealer creep” in a door jamb, where the sealer’s edge is exposed rather than covered with
Powersports Tech Tips: Specialty Tools
A technician can carry out the majority of their work with basic hand tools. A major dividing line appears when the service manual calls for the use of a special tool. The professional technician should have a large selection of specialty tools for handling specific jobs. Even a crafty shade tree mechanic can be stonewalled
Tech Tips: Direct Fuel Injection Cleaning
Models: 2009-2014 GM Vehicles With Any of the Following Direct-Injected Gasoline Engines 2.0L (RPO LNF) 2.4L (RPO LAF, LEA, or LUK) 2.8L (RPO LAU) 3.0L (RPO LF1 or LFW) 3.6L (RPO LFX or LLT) Some customers may complain of a MIL (malfunction indicator lamp, or check engine light) and engine misfire. In some cases, the
The Top OEM And Aftermarket Turbocharger Tech Tips
In the past decade, turbochargers were installed on more cars and trucks than ever before. These are the top OEM and aftermarket tips to help you install a new turbocharger without a comeback.
J2534 Tech Tips
In this video Tip Clip Bob Pattengale presents information you need to know if you need to perform relearns after replacement of any vehicle components. He talks about how to do the research to determine if a relearn is needed and shows us how to best prepare for the relearn or reprogramming process.
Ford 7.3 DIT Powerstroke Tech Tips
In this excerpt, Mike Cleary gives you several quick fixes on various Powerstroke engine problems. Tech tips include 1994 ½ EEC tests, injector spill spouts, camshaft position sensor codes, and dead accelerator pedals. He also covers dual mass flywheels, air cleaner updates, injector replacement procedures, and loose IPR jam nuts, as well as injector performance analyzers, oil consumption, no start relay ratcheting, and much, much more!
Do Technicians Need Tips?
Asking for a tip would not go over well with your future customers.
Top 5 Back to School Tips for Student Technicians
Are you looking to maximize your training? Here are our five essential back-to-school tips.
