10 Commandments Of Catalytic Converter Replacement -

10 Commandments Of Catalytic Converter Replacement

Catalytic converter replacement can be one of the most arduous repairs a shop takes on.

Catalytic converter replacement can be one of the most arduous repairs a shop takes on. It is not that the repair itself is overly complicated; it is the paperwork, laws and warranty issues that can be the real headache. Below are the 10 commandments of a catalytic converter replacement handed down from the EPA.

1. If the replacement is not required by a state or local program, both customer and technician must sign a statement concerning why the converter was replaced. (Manufacturers either provide such a statement with the catalytic converter or have an example in their catalogs.)

2. If the replacement is required by a state or local program, the technician must keep a copy of the statement or order by the program representative.

3. The invoice for replacement must include the customer’s name and complete address, the vehicle’s make, model year and mileage, as well as the reason for catalytic converter replacement.

4. Retain copies of the invoices and statements for six months and the replaced converters for 15 days (converters must be identified or marked as to which customer’s car they came from).

5. Install the catalytic converter in the same location as the original.

6. Install the same type of catalytic converter as the original — oxidation, 3-way or 3-way plus oxidation (dual-bed). This information is sometimes available on the emission tune-up label or from the manufacturer’s application catalog.

7. Install the proper converter for the vehicle as determined and specified by the converter manufacturer. There are engine-size and vehicle-weight limitations that make it inappropriate to install certain converters on certain vehicles. Newer vehicles with On-Board Diagnostic (OBD) systems may not always operate properly with certain aftermarket products. Therefore, the catalog should always be consulted for the correct application.

8. The catalytic converter replacement must always be properly connected to any existing air injection components.

9. Install all the other required converters the vehicle would have originally come with unless the converter manufacturer has stated in writing that the aftermarket converter is designed to replace more than one converter.

10. For a new aftermarket catalytic converter replacement, the installer must fill out the warranty information card supplied by the manufacturer and give it to the vehicle owner or operator.

Violating the EPA rules is a breach of federal law since noncompliance is likely to increase the amount of pollution coming out of the vehicle. Penalties for violations by individuals, service or repair shops or fleet operators can be up to $2,500 per violation. (Each improper installation is considered a violation.) Additionally, new-car dealers can be penalized up to $25,000 per violation. Any person who causes a violation could be subject to the same penalty as the technician. 

New York State’s Environmental Conservation Law regarding catalytic converter installation mandates a minimum penalty of $500 for a first violation, and up to $26,000 for each subsequent violation. Failure to maintain complete records or submit reports may also result in a violation.

The conditions under which the catalytic converter replacement was installed is of great importance to the parts manufacturer. Even simply using the wrong part on a vehicle may allow the converter manufacturer to not honor the 25,000-mile or the 5-year/50,000-mile warranty.

For vehicles in California and other states that require California Air Resources Board (CARB)-mandated emissions equipment, the rules are different. All of the same mandates apply, but they are much more strict about the replacement converter being CARB-compliant. Also, the CARB rules are based on a one-for-one replacement strategy, and the addition or consolidation of converters is forbidden.

The greatest difference between states is the length of time needed to keep documentation. California and New York require paperwork be kept for at least four years.

Also, it is important to check local and state laws before installation. New York, for instance, enacted a ban on installing used catalytic converters on vehicles.

Article courtesy of Underhood Service.

You May Also Like

Understanding Differences Between Aluminum And Cast Iron

Sheer material differences aside, what are the features and benefits of aluminum and iron engine components?

It doesn’t take a rocket scientist to realize that the rising cost of raw materials and supply chain disruptions over the last few years would transform our industry. However, we never envisioned the sudden demand for billet blocks to surpass that of cast iron or aluminum. The cost of cast aluminum blocks are creeping ever closer to that of their billet counterpart, therefore the additional expense is now a reasonable and practical upgrade for our racers. 

Battery Charging and Programming Diagnostics

Temperature changes how the battery discharges and the amount of current that can be delivered.

Adapting Sensors For Changing Inputs

Let’s focus our attention today on one small facet of the technology inside modern vehicles: Adaptations.

Ignition System Do’s and Don’ts

Why do ignition systems give technicians problems when diagnosing ignition-related misfires? The answer is that some technicians use tests that might give inconclusive results or do damage to the coil or drivers inside a module.

Belt Service For Hybrid and Stop/Start Systems

Knowing how to “force start” a hybrid vehicle can be helpful if you are trying to diagnose a noise problem that involves the accessory belt drive system.

Other Posts

Catalytic Converter Replacement

Converters must be certified and labeled with the correct codes that are stamped into the shell when replacing.

MEMA Applauds EPA on Light- and Medium-Duty Emission Standards

MEMA says the EPA final rule includes an amended and more comprehensive analysis of technological alternatives.

Fuel Pumps and Cranking

Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.

BMW 4-Series Service

The 4-series does not stray far from the typical BMW engineering and operation.