Modern Vehicles Need Precious Metals 

Modern Vehicles Need Precious Metals 

Modern ignition systems require dual precious metal spark plugs capable of supplying the highest voltage outputs to date.

Vehicle technology is continually advancing to meet consumer demand for better fuel economy, as well as government requirements for fewer emissions. The result is downsized engines with less displacement for fuel combustion, forcing original equipment manufacturers to design advanced spark plugs using precious metals to improve engine performance and reliability.

These modern ignition systems require dual precious metal spark plugs capable of supplying the highest voltage outputs to date. Original equipment precious metal spark plugs also feature specialized firing and ground electrode designs like dual fine (DFE) and projected square platinum (PSPE). In combination with modern ignition systems, these spark plugs can withstand up to 40,000 kV. Understanding modern ignition systems, and why they increasingly require advanced spark plugs, will help complete preventative engine maintenance during tuneups.

Waste spark systems became popular because of the efficiency and reliability with two spark plugs per ignition coil. While standard ignition systems fire once per combustion stroke, waste spark systems fire twice, once on the combustion stroke and once on the exhaust stroke.

Standard ignition systems typically fire with only a negative polarity, sending electricity from the center electrode to the ground electrode. Every time the ignition fires, a small amount of gap erosion occurs on the electrode with negative polarity.

In a waste spark ignition system, the coil sends voltage down a spark plug to the ground electrode. On the shared circuit, the paired cylinder is being fired on a waste spark. The waste spark is accomplished by recapturing the remaining voltage through the ground electrode and firing to the center electrode, completing a circuit (Figure 1). 

Figure 1

The cylinder where the spark travels from the center to the ground electrode will wear on the spark plug’s ground electrode. The cylinder where the spark travels through the ground to the center will wear on a spark plug’s center electrode (Figure 2). Not using dual-precious metal spark plugs can result in uneven wear on the spark plugs and possible misfires.

figure 2

Installing spark plugs with the correct material types recommended by the OEM ensures long-term satisfaction with customers and prevents unnecessary comebacks with otherwise preventable ignition-related repairs.

This content is provided by NGK Spark Plugs.

For more information about modern ignition-related repairs, contact NGK’s Technical Support Team at (877) 473-6767 ext. 2, or visit ngksparkplugs.com.

You May Also Like

ECM Damage

Engineers have devised two strategies that can be called the “immune system” for the electrical system.

With even the most basic vehicles having more than 10 modules connected to hundreds of circuits, there is always a possibility that wires can get crossed. Engineers want to prevent damage to wiring, circuit boards and sensors if something goes wrong that causes a short or open. To avoid damage and possible fires, engineers have devised two strategies that can be called the “immune system” for the electrical system.

Fuel Pumps and Cranking

Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.

PCV System DTC

PCV systems control crankcase pressure.

A/C Condenser Clogs

When a compressor fails, the question for most technicians is whether to flush the condenser or replace it.

Checking The Auxiliary Water Pump

A car or truck comes into the shop with a complaint of poor heater performance. The issue may be the auxiliary water pump.

Tech holds up heater core

Other Posts

It’s Got Spark!

Why can’t you trust some spark tests?

Understanding Differences Between Aluminum And Cast Iron

Sheer material differences aside, what are the features and benefits of aluminum and iron engine components?

Diagnosing Misfires

What if there are no codes and a misfire is intermittent? This is where it gets complicated. 

Fuel Pressure Diagnostic Service

Use a scan tool that can look at special direct fuel injection parameters and perform bidirectional tests.