NFPA Considers Standard to Mitigate Battery Hazards

NFPA Considers Standard to Mitigate Battery Hazards

The National Fire Protection Association is gauging whether support exists for the development of standards to address known hazards associated with batteries.

Batteries are increasingly being used in a vast array of applications, from consumer products and micromobility devices known as e-bikes and e-scooters to electric vehicles (EVs) and utility-grade energy storage systems (ESS). As the use of these devices has grown, so too, has the number of fire incidents associated with them, according to the National Fire Protection Association (NFPA).  

First released in 2019, NFPA 855, Standard for the Installation of Stationary Energy Storage Systems, provides minimum requirements to mitigate risk associated with stationary ESS and the storage of lithium metal or lithium-ion batteries. But as the battery industry and use continue to evolve, NFPA said the NFPA 855 is being used as the primary place within the NFPA standards process to raise general battery safety issues.

The NFPA said this has resulted in an expansion of its scope beyond the initial purpose of NFPA 855 and has identified a gap in guidance for general battery safety throughout the lifecycle of batteries beyond the use in a given installation. Bridging this gap can also provide additional requirements to advise and support local authorities in determining specific codes and standards applicable to battery hazards that arise in their communities, which can lead to a safer environment for everyone, NFPA added. 

In response to these needs, the NFPA said it is considering the development of a comprehensive standard, proposed as NFPA 800, Battery Safety Code, to provide uniform, minimum requirements to address fire, electrical, life safety and property protection from battery hazards. It is the intent to reference existing related standards, by NFPA and other standards-developing organizations, where applicable, and focus on developing requirements where there are gaps. The NFPA said requirements are anticipated to include fire, explosion, and other dangerous conditions related to battery technologies as experienced through the lifecycle of a battery: raw materials and battery production through storage, use and end of life. 

NFPA said it is now seeking comments from all interested organizations and individuals to gauge whether support exists for:

  • The development of standards to address known hazards associated with batteries;
  • The development of standards to provide minimum requirements to ensure fire, electrical, life safety, and property protection throughout the lifecycle of batteries; and
  • The development of standards to minimize loss and damages resulting from current and future battery technologies.

You May Also Like

Blink Charging Achieves ‘In Process’ FedRAMP Status

Once fully accredited, Blink’s EV charging network will be available to government agencies.

Blink Charging Co. announced it has achieved the “In Process” designation granted by the Federal Risk and Authorization Management Program (FedRAMP) for its EV charging solutions. Blink is presently listed as “In Process” in the FedRAMP Marketplace. Upon achievement of full accreditation for the Company’s EV charging network, the Blink Network, government agencies will be able to contract with Blink or the Company’s federal resellers for networked EV charging, the company said.

Volvo Cars Starts Production of Fully Electric EX90 SUV

The EX90 is based on its next-gen EV technology base, with a fully electric range of up to 372 miles.

Hitachi Astemo Developing Steer-by-Wire Technologies for EVs

The company is also creating a 360-degree-camera that provides LiDAR-like results for autonomous vehicles.

ABB E-mobility Releases the A400 All-in-One Charger

ABB E-mobility said it designed the A400 with the aim of achieving a 10-year product lifetime.

EVgo Names First Chief People Officer

Keith Hutchison brings over two decades of experience working in human resources within the energy and EV sectors.

Other Posts
EV Safety Basics on the Shop Floor – Part II

As long as you follow the EV guidelines, you are going to have to use the proper PPE and insulated tools.

EV Safety Basics on the Shop Floor – Part I

It’s critical to utilize OEM service information and procedures for each and every hybrid or EV.

Zapp EV to Appoint Manufacturing Partner in India

Bounce Electric 1 Private Limited will be Zapp’s contract manufacturing partner for sales of the i300 in India.

Gravity Releases Universal EV Charging ‘Trees’

The ‘trees’ require no utility upgrades and are capable of providing 200 miles of range in either 13 minutes (200kW) or 5 minutes (500kW).