Separating AGM Battery Facts From The Myths

Separating AGM Battery Facts From The Myths

AGM eliminates acid spilling in an accident because it is sealed. They can be installed at odd angles.

Have you noticed more batteries are moving into the trunks and under the seats of some vehicles? Chances are, if the battery is not under the hood, it is an absorbent glass mat (AGM) or gel cell battery. AGM eliminates acid spilling in an accident because it is sealed. They can be installed at odd angles.

These batteries pack a lot of power for their size and weight, which allows manufacturers to shave off a few pounds from the vehicle. That’s a big reason why they are being found more and more on late-model vehicles. Also, these batteries have a greater reserve capacity to support stop/start systems and key-off functions. 

Here are the four AGM myths that you may have heard.

You can use your regular battery charger on AGM or gel cell batteries.

False. These batteries like to be charged slow and low due to differences in internal resistance. 

Many AGM battery chargers have microprocessors that collect information from the battery and adjust the current and voltage accordingly. Some have different settings for charging flooded or AGM batteries. Overcharging can kill these batteries. Also, alternators are not chargers. Don’t rely on an alternator to do the work of a charger. If a battery is discharged to the point that it cannot start the vehicle, use a charger as soon as possible to make sure the battery gets fully charged.

AGMs and gel cells can be tested the same way as conventional batteries.

False. These types of batteries have lower internal resistance than flooded batteries. Older capacitance battery testers/analyzers may not be able to accurately read these batteries. Most new battery analyzers have a special mode for AGM/gel cell batteries. Old-school load testers might not provide conclusive results. 

Using a multimeter to measure the state of charge is not the same as with a conventional flooded battery. After the surface charge is removed, the voltage of an AGM with 100% state of charge might be 13.0-volts. A flooded battery might have only 12.6-volts. 

Auto technician testing the electrical system on an automobile.

AGM or gel cell battery replacement is the same as flooded battery replacement. 

True and False. While the installation of the battery may be the same for the two battery styles, some vehicles require an extra step to tell the vehicle that the battery has been replaced. 

Newer GM vehicles have a Battery Sensor Module on the negative battery cable. Ford has the Battery Monitoring System (BMS). Other manufacturers have similar systems. These systems require recalibration with a scan tool if the battery is replaced. If the system is not recalibrated, the alternator might overcharge the new battery and cause the battery to fail soon after replacement.

Some vehicles can perform a self-learn for the battery by measuring the internal resistance
of the battery. But often a scan tool can force the procedure so you know there will be no issues with
the battery.

You can’t upgrade a customer to an AGM battery if the vehicle originally came with a flooded battery.

False. You can install an AGM battery into a flooded battery application. An AGM battery will give the vehicle more cold cranking power and greater resistance to heat and vibration. However, you never want to downgrade a vehicle that came with an AGM battery to a flooded battery.

Article courtesy Underhood Service magazine.

You May Also Like

Diesel Turbocharging Basics

There’s a reason diesels typically utilize compound turbo setups instead of twin turbochargers.

Why Real Twin Turbos Aren’t Seen on Diesel Engines

A noticeable trend in OEM vehicles, and the aftermarket that supports them, is a lack of twin-turbo systems. However, when it comes to performance spark-ignition engines, twin-turbo set ups appear to be fairly common, while in turbo diesels it is only seen on very strict OEM conditions and rarely in performance diesel conditions.

Batteries For Stop/Start Systems

On all stop/start vehicles, the life and performance of the battery are measured by the vehicle in several ways.

Fuel Tanks and Pumps

The behavior of the fuel wells, pumps & sending units are often misdiagnosed, leading to fuel pumps being replaced.

Hybrid & BEV Cooling System Maintenance 

Whether it is a hybrid or BEV, the motor drive unit, battery, and inverter need thermal management by circulating coolant.

Chasing The Perfect Combustion Event

The perfect internal combustion engine would put the exact amount of fuel and air into the combustion chamber.

Other Posts
Tool Up For Belts

Here are six tools to make your next belt replacement more productive.

Fuel Pumps and Cranking

Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.

How Battery Service Continues To Change

Your attention to a battery’s condition will tell you if it needs to be replaced – and with what.

5 Tricks To Solving Belt Noise

If engineers get it wrong, the belt will be noisy or rob the engine of power. For technicians, the job is even tougher.

Serpentine Belt Grooves