Chrysler Portal Concept: Next-Generation Family Transportation Designed By Millennials For Millennials
Battery-electric vehicle technology contributes to cabin spaciousness with a minimized engine compartment and a low, flat-load floor atop the battery pack that is ideal for transporting people and equipment for an active lifestyle.
Fresno City College Selected As New Training Site For Automotive Technology
Students in Fresno City College’s Automotive Technology Program will receive special training on Fiat Chrysler vehicles thanks to a new partnership with Mopar FCA.
Mott Automotive Technology Program Joins Fiat Chrysler Training Network
The training program prepares people to work as level 1 technicians upon graduation from certified two-year training institutions.
Dodge/Chrysler Heater Hose “Y” Connector Prone To Cracking
Due to a high replacement demand, Gates engineers have developed a solution for the two-heater hose assembly “Y” connectors that are prone to cracking.
Mopar Certification Training Coming To Ivy Tech Northeast
Ivy Tech Community College Northeast in Fort Wayne, IN, is partnering with Fiat Chrysler Automobile’s Mopar Career Automotive Program.
Chrysler Transmission: The Case Of The Shiftless 48RE
The truck originally came into the shop with a broken band, which is a common and very cut-and-dried failure on a high-mileage 48RE transmission. The band and other friction lining was replaced and the valve body was cleaned. And, since the 3500 SLT had 240,000 miles on the odometer, the failure-prone electronic governor was replaced as well. Unfortunately, after the rebuilt transmission was installed and road-tested, the 48RE failed to shift out of first gear.
New Program Will Drive NEIT Students To Fiat
Students in the Fiat Chrysler-oriented learning program at New England Institute of Technology (NEIT) receive the training they need to work as automotive technicians at Fiat Chrysler dealerships across the country.
Chrysler 3.5L SOHC V6 Engine (Service Notes)
If ever there was a service opportunity ripe for the taking, Chrysler’s 3.5L SOHC V6 engine (and its 2.7L, 3.2L and 4.0L cousins) is it.
FREDS Tech Tip: SCI Interface FKTC
In this tip clip, Dave Hobbs talks about what to do if you have a vehicle with no PCM data. You plug in your brick, and you go to pull codes or look at PIDs in this late 90s, whatever, early 2000 Chrysler. It’s got CCD. You think you’re talking on the CCD. You’re actually talking on SCI, and scan tool just sits there and says no communications. What could the problem be? Is it a bad scan tool? Bad computer? Bad bus wires? Well, in this clip Dave gives some quick pointers on what to look for next.
Chrysler Data Bussing: CCD, SCI Data Lines Tech Tip
Bill Fulton talks about Chrysler data bussing. Talking about CCD and SCI data lines and using bus circuit schematics from a 1998 Dodge minivan as an example Bill gives some in depth insights into the operation and relationships of Chrysler data bus circuits.
