fuel pump Archives - Page 3 of 5 - Tomorrows Technician
VIDEO: Fuel Pump Level Sender Operation

How do modern gas gauges stay still when the gas in your tank moves around? This video is sponsored by Carter.

Carter Adds Water Pumps To Engineered Pumps Lineup

Carter’s exclusive selection of patent-pending Premium Rapid Fit Water Pumps feature pre-mounted components.

VIDEO: Replacing Fuel Pump To Solve Slow Acceleration

A customer comes in a complains about not being able to speed up quickly when applying gas. Your first thought might be to change the fuel pump, but sometimes that isn’t enough. Andrew Markel explains how it could be an internal leak.

VIDEO: Where Have The Fuel Pump Filters Gone?

Andrew Markel discusses how to diagnose a fuel pump, and the importance of replacing the entire module if the pump is failing.

Fuel Pump Codes And Control: Keeping Pressure In The Zone

The first electric fuel pump circuits were very simple. The pump circuit usually involved a relay and fuse. The control side to the relay was typically wired to an ignition circuit or key switch. The control of the fuel pressure was performed with an analog regulator that could keep a static pressure and adjust for loads with a vacuum signal.

VIDEO: Diagnosing Intermittent Fuel Pressure Issues

Andrew Markel discusses fuel pressure, and the different ways to diagnose issues without using a pressure gauge.

Top EVAP Tips When Replacing Fuel Pumps

Nothing is worse that an EVAP code after a fuel pump has been replaced. Discovering that the tank needs to be dropped again to address a problem can kill shop productivity and profitability. Keep reading for tips that can help you avoid comebacks and dropping the tank for a second time.

Pulse-Width Fuel Pump Diagnostics

You will see only one fuel line going to the fuel rail on most late-model vehicles. Instead of using an engine vacuum routed to a pressure regulator under the hood, returnless systems use engine data and vary the speed of the electric pump to meet fuel pressure and volume requirements without having to bleed off and return it to the tank when the engine does not need it.

VIDEO: Fuel Pump Voltage; Different Numbers On Different Tools?

Andrew Markel discusses the current used to drive fuel pumps, and how measuring it with a suite of diagnostic tools can determine the component’s health.

VIDEO: Checking The Voltage On A Fuel Pump

Andrew Markel explains how modern vehicles have pressure sensors that send out a voltage signal, and how a diagnosis can be made by measuring the signals with a scope.

VIDEO: Extending Fuel Pump Life

Andrew Markel discusses cleaning the fuel tank and how it can improve the life of the fuel pump.

Delphi Product & Service Solutions Launches ‘Clean The Tank’ Initiative

Most fuel pump and module warranty issues are linked to debris or contamination in the fuel tank that may have accumulated over vehicle use, or during the removal and replacement procedure.