The Training It Takes To Be a Body Shop Technician -

The Training It Takes To Be a Body Shop Technician

Adapted from Mark Claypool's article in BodyShop Business

The body repair workforce is incredibly knowledgeable, skilled and talented. But this didn’t just happen. Someone had to train them; someone had to be their instructor or mentor. The ways people learned the craft are probably as varied as the number of techs out there. Schools trained many, but probably not as many as you might think. Probably only about 25% or so. Others followed in their father’s footsteps. Still others had an interest in the field and were lucky enough to hook up with an experienced tech who was skilled enough to transfer his knowledge.

If you are interested in knowing what you will need to go through to be a body tech, then this article is for you. Maybe you have the dream to become a body tech, but do you have the patience to correctly learn the skills and reach your goal?

Time to Train
So just how long does it take to learn the body repair industry? Good question. To find the answer, I sought input from many sources. Interestingly enough, while it’s easy to get all the input you could ever want on topics like cycle time, diminished value, insurance relations, Direct Repair Programs (DRPs), etc., very few seemed willing – or able – to answer how long it takes to train new techs. It gets even more difficult when trying to nail down how long it takes in relation to learning specific skills and competencies.

The input I did receive was well-thought-out, field-tested information and should give this industry some insight regarding about how long it takes to train techs. But because we’re dealing with human beings, there’s no set answer to this question. The best I can do is give you a range. Most trainees will fall within the range, while a few others may beat the clock a bit and others may take longer. It all depends on the position(s) you’re training for and the people you’re training.

“I’m not 100% behind the idea of training everyone to become a journeyman,” says Tony Passwater, president of AEII, a consulting, training and system-development company in Indianapolis, IN. “I believe much more in position training to accomplish a skill set that will benefit the shop and the master tech (mentor). In my classes, I’ve done hands-on exercises to show how to get an entry-level person with no experience to be productive in any department within 90 days, paralleling much of what’s been created in the Mentors At Work system. The key is to define what you’re going to train in a logical time frame, make the selected mentor aware of his responsibilities and time frame, and make the new hire aware of what’s expected.”

Bob Medved – State Farm’s senior claims instructor, Learning and Development – agrees that a mentor system is needed to train and retain employees.

“Beyond first-year techs, individual employee education must continue in order to get them to the next level,” says Medved. “This means repair facilities must have in place meaningful continuing education, training and mentoring programs. Employees who feel the next level is unattainable will inadvertently migrate to an employer who can get them there – or leave the industry altogether.”

Medved and State Farm serve together with 18 other business partners, five local collision repair businesses and the Philadelphia School District on a program called “Service Learning.”

“This program is aimed at developing qualified entry-level collision techs who can be productive from day one of employment,” says Medved. To accomplish this, agreed-upon learning standards must be met by the student prior to graduation.

Meeting the Standards
Instead of schools creating a combo-tech graduate (i.e. knowledgeable about many things but masters of nothing), this Service Learning program attempts to help the school system understand what standards are necessary today for a graduate to become employed in the local community.

“The collision repair industry would be much further ahead if these standards (any standards) could be agreed upon and required for entry-level techs,” says Medved.

Part of the problem is what ASE currently requires for school certification. (We understand that modifications may be on the way that are a positive step forward.) The ASE/NATEF task list suggests nearly 350 skills and tasks that are to be taught during 1,110 hours (over two years) of instruction in a school. Some specialization is allowed, but at best – given what the I-CAR Education Foundation’s survey says shops are looking for – it’s too broad a set of standards to produce entry-level employees who can step in and help the shop make money from day one.

Setting the PACE
To address fundamental body tech training, Ron Ray, executive director of the I-CAR Education Foundation (one of the industry partners in the Service Learning program) says the PACE + SP3 program was created, taking 54 baseline skills out of the NATEF task list. (See chart titled, Pace + SP3 Task List.)

“Assuming a two-year secondary school program, we cherry-picked 53 tasks from the non-structural/damage repair and structural/damage repair areas, and one from the plastics and adhesives area,” says Ray. “These tasks prepare the student to perform tasks that relate to R&R bolted parts, prep for paint, final detailing and minor dent repair.

“We encourage instructors to ensure that the students who’ll be working as interns during the summer before their senior year have learned all of the 54 tasks in a competency-based manner – and not just by watching a video or group demonstration. My estimate is that the instructor needs about 360 student contact hours to achieve this.

“These select tasks allow the student to work on both sides of the shop and possibly determine how they may wish to specialize – unless they wish to become a combo tech, which is becoming a dying breed in the larger shops. In the senior year, the students may wish to specialize, assuming the program can accommodate that or continue to progress with learning more advanced tasks.”

Levels of Difficulty
Scoring on the Industry experts agree, that the PACE + SP3 program is a positive step forward, but what about the three new collision industry hires out of four who come from sources other than a school? Mentors at Work, another partner in the Service Learning program, has suggested ranges (shown below) that shops can expect when following a structured, in-house apprenticeship program. The center column gives a summary of the tasks necessary to perform that job function. The time in the right column is the approximate time it’ll take to learning that task. Just remember that people are individuals so times will vary, plus each in-house trainer or mentor will have a different ability to train others so this creates a variable as well.

The job titles are sequenced according to difficulty. Mentoring a Painter’s Assistant is much easier and takes much less time than training a Body Tech “A” level. The highest technical level is a combination of Body Tech “A” and Frame Tech “A.” This would be a master technician capable of reconstructing literally anything on any vehicle.

All of this is terrific information – if you do something with it. Unfortunately, too many in this industry aren’t terribly concerned about how long it takes to train new people. They’re content to steal away experienced techs from other shops.

But, as we watch the most progressive shops having success training their own or moving students they hire from schools up the ladder, they’re creating a shop and management culture that’s superior to the “average” shop – making it harder and harder for competitors to steal employees from them.

You May Also Like

Standard Motor Products Introduces 200 New Numbers

The release provides new coverage in 60 distinct product categories and 75 part numbers for 2023 and 2024 model-year vehicles.

Standard Motor Products, Inc. (SMP) announced it released 200 new part numbers in its May new number announcement. This most recent release provides new coverage in 60 distinct product categories and 75 part numbers for 2023 and 2024 model-year vehicles, according to SMP.

As vehicle technology evolves, Advanced Driver Assistance Systems (ADAS) become more complex to keep vehicle occupants safe. New releases include 18 new Park Assist Cameras, adding coverage for more than 9 million import and domestic vehicles, as well as Park Assist Sensors for Ford, Kia and Nissan vehicles. Seven ABS Speed Sensors have been added covering many popular vehicles, including 2019 Chevrolet and GMC 1500 trucks, the 2024-20 Cadillac CT4 and the 2023-19 Nissan Titan XD. Electronic Parking Brake Actuators are new for the 2023-19 RAM 1500 and Ford vehicles like the 2021-20 Escape and 2023-21 Mustang Mach-E. Accelerator Pedal Sensors are newly released for the 2023-22 Hyundai Tucson and 2023 Kia Sportage.

CRP Industries Announces New VP of Finance

Luis Vargas will provide CRP with financial leadership, planning and analysis.

ASE Spring Testing is Underway

Those who register by June 30 will have 90 days to schedule an appointment to take their selected ASE tests.

Advance Auto Parts Celebrates ‘National Road Trip Day’

Advance’s “Check Your Battery, Not Your Bag” campaign offers free gift cards for road trip essentials and curbside services, beginning National Road Trip Day – Friday, May 24.

Lumileds to Sell Lamps/Accessories Business to First Brands

Lumileds’ automotive lamps factories in China, Germany and Poland are included in the acquisition.

Other Posts
Hunter Engineering Releases New Alignment Coverage

The semi-annual specification update includes new and existing records.

FCS Introduces 42 New Numbers in May

Complete strut assemblies, shock absorbers, shock absorber assembly kits and suspension struts for popular VIO applications are included.

NHTSA Issues New Standard for Automatic Emergency Braking

The rule makes AEB standard on all passenger cars and light trucks weighing up to 10,000 lbs. by September 2029.

MEYLE Expands Electronics, Sensor Product Portfolio

The focus is on assistance systems and engine and transmission management, with more than 300 new part numbers.