TPMS: Prevent Delays With The Right Relearn Procedures -

TPMS: Prevent Delays With The Right Relearn Procedures

There are a few things you can do to ensure the relearning process is as efficient as possible.

Relearns are a necessary step but can be complicated as every vehicle model has a unique set of actions. Each step must be performed in a specific sequence in order for it to work properly. All too often, it is the relearn procedure that causes delays in TPMS service. 

There are a few things you can do to ensure the relearning process is as efficient as possible and help avoid wasted time in the bay. First, it is important to understand the difference between relearning a vehicle and programming a sensor. There are a few things you can do to ensure the relearning process is as efficient as possible and help avoid wasted time in the bay. There are a few things you can do to ensure the relearning process is as efficient as possible and help avoid wasted time in the bay. First, it is important to understand the difference between relearning a vehicle and programming a sensor. 

If you use a programmable sensor, the sensor is completely blank and needs to be programmed to the specific MMY of the vehicle being serviced using a compatible and updated TPMS tool. Relearning a vehicle is the process of telling the vehicle which sensor is located in each tire. This ensures the vehicle is reading the correct pressure and displaying their proper locations. 

Steps To A More Efficient Relearn Process:

Make sure you follow the relearn entirely and in the proper sequence. Double-check as you go that the steps are done correctly. There are no shortcuts to the relearn process.

Call right away. Don’t waste time. If you try everything and still can’t turn off the TPMS light, don’t wait to give your sensor manufacturer’s tech line a call and let them walk you through it.

When you call, make sure you have the tenth character of the VIN number ready to share. It symbolizes the model year and will be needed by your service representative.

Have your Diagnostic Trouble Codes (DTCs) ready to share with the service representative at the time of the call.

Make sure you know which sensor was originally removed from the vehicle and have it ready.

Also, consider creating or using your sensor manufacturer’s best practice sheet each and every time a TPMS service is performed. Your sensor manufacturer plays an important role in your success with TPMS, so ensure you are getting the proper resources from them.

Courtesy of Tire Review.

You May Also Like

Chassis Alignment

The source of the complaint can be the angles, electronics or tires.

Chassis alignment can be an art when you have to resolve a chassis or steering complaint from a customer. The source of the complaint can be the angles, electronics or tires. The diagnostic process can be more challenging than curing a misfire or no-start problem.

Your alignment bay should be treated as a colossal scan tool that can pull the angles from the vehicle so they can be used for chassis and suspension diagnostics. Performing camber and toe adjustments are just like calibrating a sensor, but the process is, of course, completely mechanical.

Active Suspension Service 

An active dampener allows for a ride without compromise.

Honda Ridgeline Caliper Replacement

The parking brake and hydraulics are where you’ll find any service issues.

An In-Depth Look At CV Axles

As the engine moves from the effects of torque and as the suspension of a vehicle travels up and down, the angle of the driveshaft changes.

MINI Alignment Tips

When looking over the service information or ordering parts for a MINI, you may run into the R-series numbers.

Other Posts
Multi-Link Front Suspensions

Why do some suspensions have so many ball joints? Here’s why.

Integrated Wheel Ends

The leading cause of IWE failure is water finding its way into the vacuum lines under the hood and in the wheel well.

Wheel Speed Sensors and Bearings

The only way to diagnose the sensor and circuit is with a scan tool or scope. 

7 Brake Myths Busted

There are some myths about brake pads, rotors and hydraulics that need to be busted.