TPMS Scenarios That Cost Time and Money For Repair Experts

TPMS Scenarios That Cost Time and Money For Repair Experts

Programmable sensors and auto location offer many benefits but may require extra steps during service.

TPMS is increasingly becoming more functional and efficient as technology catches up with the needs of the driver. As TPMS improves and features are added, it can also feel a little more complicated on the service side, as there are often extra required steps that can be overlooked. Programmable sensors and auto location are two examples of features that offer many benefits but may require extra steps during service. Below are three scenarios that tech hotlines most often receive to help your shop navigate these processes.

“Software updates are extremely important for you to have access to any new features and bug fixes.”

“I installed the sensors and performed the relearn, but the vehicle isn’t recognizing the sensors.”
The most common cause of this scenario is the technician is using a programmable or “writable” sensor — but did not program it. There is a lot of confusion in the market regarding the difference between “programming” and “relearning.” You “program” a sensor and “relearn” a vehicle. If you are using a programmable sensor, you have to tell the sensor what MMY on which it is being used. It is like putting a blank CD in your player and expecting it to know what song to play. You have to first load it with music. Similarly, you have to program the sensor before it will send a signal to the vehicle’s ECU.

“I programmed the sensors, but they aren’t displaying properly on the dashboard.”
Did you relearn the vehicle? Late-model vehicles have a new TPMS feature called “Auto Location.” This feature displays the pressure of each tire on the dashboard. So, if one tire is low on air or one sensor is malfunctioning, you know which tire or sensor needs service, saving you time. In order for that function to work, you need to tell the vehicle which sensor ID is in which tire. You took the first step in telling the sensors to which vehicle their signal is being sent, but now you need to tell the vehicle where those sensors are by performing a relearn procedure.

“My TPMS tool won’t program the sensor.”
It is often assumed by the user that if the TPMS tool isn’t able to diagnose or program the sensor, then the sensor must be faulty. However, if you are using an OE-quality sensor, then that is likely not the case. OE suppliers typically leave a very small allotment for faulty sensors on the manufacturing line (as an example, Schrader is four parts per 1 million). If you don’t use an OE-quality sensor, there is a higher chance that the sensor is faulty, but even more likely that one of these two scenarios exists:

1. The tool might not be updated with the latest TPMS tool software. Software updates are extremely important for you to have access to any new features and bug fixes that are included in the update, but they are also important because they include the latest sensor coverage for new vehicles on the market. If you don’t have the latest update, then the vehicle MMY that you are servicing may or may not have coverage on the tool.

2. The TPMS tool does not support coverage of the sensor you are using. All TPMS tools cover a unique set of sensor brands. Some companies create their own tools to work only with their sensors, while some tool companies cover multiple brands of sensors. Depending on which tool you own, it may or may not work with the brand of sensor you are using. 

This article appears courtesy of TechShop magazine.

You May Also Like

Guidelines To Visually Inspecting A Shock Or Strut

The first thing you need to realize is that no seal is perfect.

How much oil is too much oil for a shock or strut to leak? There have been many technical service bulletins written on the topic to help OEMs avoid needlessly replacing units under warranty. What was their conclusion? Some oil leakage is expected.

The first thing you need to realize is that no seal is perfect. The seal that keeps the oil and nitrogen inside a shock will leak tiny amounts of oil and gas from day one. As the shaft travels past the seal, some oil will stick to the shaft. We are talking about microscopic amounts of oil for every stroke. The oil eventually coats the outside of the unit.

Axle Torque Procedures

Guessing the correct torque setting is a bad idea.

Wheel Speed Sensors and Bearings

The only way to diagnose the sensor and circuit is with a scan tool or scope. 

Do Brake Pads Impact The Environment?

The focus on tires and brake pads has come about because tailpipe emissions have been significantly reduced.

Replacement Strut Alignment Angles

Earl MacPherson’s struts eliminated suspension complexity in one way but changed vehicle geometry in others.

Other Posts

Throttle-By-Wire Diagnostics

On older throttle cable systems, the carburetor or fuel injection system reacted to the throttle angle.

Reflashing Power Supplies

Trying to make do with a battery charger or jumper pack can cost you more than the price of a reflash power supply.  

Battery Charging and Programming Diagnostics

Temperature changes how the battery discharges and the amount of current that can be delivered.

Noise Reduction is More Important for Tires Today

Tire engineers use a bevy of tests to strive for lower decibels and create a tire that minimizes any noise distractions.