Avoiding Water Pump Damage with Correct Coolant Mix

VIDEO: Avoid Water Pump Damage With The Correct Coolant Mix

Adam Redling explains the importance of properly mixing coolant and water to avoid damage to the water pump.

Adam Redling explains the importance of properly mixing coolant and water to avoid damage to the water pump. Sponsored by Auto Value and Bumper to Bumper.

Video courtesy ImportCar.

You May Also Like

Fuel Pumps and Cranking

Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.

Here is a diagnostic puzzle: An owner comes to your shop complaining that it takes longer than expected to start his car’s engine in the morning. There are no codes for the crankshaft and camshaft sensors. And, the oil pressure is within specifications. If you are lucky, you might have a code for low fuel pressure on the high side of the direct injection system. What could be the source of the problem?

Catalytic Converter Replacement

Converters must be certified and labeled with the correct codes that are stamped into the shell when replacing.

Wheel Bearing Service Tips

When faced with any noise complaint, take the time to test-drive the car.

Honda Ridgeline Caliper Replacement

The parking brake and hydraulics are where you’ll find any service issues.

ADAS Calibration Tips

Here are 10 tips to follow during ADAS Calibration.

Other Posts

Electric Power Steering

Today’s systems have been refined.

BMW 4-Series Service

The 4-series does not stray far from the typical BMW engineering and operation.

Transmission Valve Body Service

Four basic items are necessary to start your own reprogramming ventures.

Crankshaft Counterweights And Balancing

Imbalance in the engine exhibits vibration and damage. Balancing becomes critical to any engine build.