VIDEO: Belt Inspection

VIDEO: Belt Inspection

Noise is the first sign that more components than just the belt need attention. This video is sponsored by Continental.

When it comes to belt inspection, there are three questions you need to ask.

Is there noise?

What do the surfaces of the belt and pulleys look like?

Is the wear across the belt or in a specific area?

If you can confidently answer these questions, you can not only make the right call on the belt, but the entire belt drive system.

Noise is the first sign that more components than just the belt need attention. Listen to the belt before proceeding with the rest of the inspection. The first clue is a belt squeal heard during engine start-up. The second clue might be a belt squeal heard during parking maneuvers or during an alternator load test.

Appearance of the belt’s grooves and pulleys matter. Late-model belts should not crack or show signs of abuse in normal operation. The belt should wear uniformly. The OE-recommended service interval is based on this wear and not on signs of cracking. Once enough material is worn away from the grooves in the belt, the grooves on the pulley bottom out, and the belt is not able to grip the alternator, power steering pump or A/C compressor. This is why following replacement intervals and measuring rib depth, using a belt wear gauge, is critical to keeping the belt and system healthy. Abnormal wear like cracking, pilling and glazing on the grooved side of the belt is a sign there might not be a problem with the belt, but maybe with the idler pulleys, tensioner or and other connected devices such as an OAD. So, replacing just the belt does not solve the underlying problem.

Cracking and missing chunks on modern belts are usually signs of high under the hood temperatures. Slipping on the pulleys creates friction and heat. If oil or coolant comes in contact with the belt, the slipping can increase and cause even higher temperatures.

Look at the entire surface of the belt. If the abnormal wear is in only one area, it is a sign the belt was damaged during installation or an incident occurred where an object came between the belt and pulley.

If the pulleys are misaligned, wear will occur on one edge of the belt. The edge is one of the most sensitive areas on the belt because the structural fibers are exposed. Edge wear is typically caused by misalignment of the pulleys.

By listening for noise and inspecting the belt, you not only spot a worn belt, but other conditions that can cause the new belt to suffer the same fate!

This video is sponsored by Continental.

You May Also Like

EV Cooling Systems

The large batteries that EVs carry need to be maintained within a specific temperature range for optimal performance.

Electric vehicles are getting popular, so you need to understand the inner workings of their cooling systems.

Unlike traditional internal combustion engines, EVs rely on a complex cooling system to regulate the temperature of various components, such as the battery, motor, and power electronics. These systems play a crucial role in ensuring optimal performance and extending the lifespan of the vehicle’s components.

What Constitutes A Complete Brake Job?

Complete, safe brake jobs are key. This video is part of the Group Training Academy.

Decoding Brake Pull Issues

Addressing brake pulls requires diagnostic dedication. This video is part of The Group Training Academy.

Understanding Stretch Shrink Belts

Andrew Markel uses an old school toy to describe how these belts work. This video is sponsored by Auto Value and Bumper to Bumper.

2 Wheels 2 Ways Ep. 4

Join Patrick and Jacqui as they explore motorcycling and powersports adventure in the Southwest!

Other Posts

ContiConnect Lite to Allow Digital Tire Management for OTR tires

Continental said ContiConnect Lite helps fleet managers monitor the condition of their tires via bluetooth.

Continental Celebrates Expansion in South Carolina

The 90,000-square-foot-building has capacity for 350 employees and is designed and built for future expansion potential.

Mass Air Flow Sensor Cleaners

What can you do both for maintenance and for service and diagnostics to confirm a mass airflow sensors functioning properly? Andrew Markel shares the secret in this video sponsored by Auto Value and Bumper to Bumper.

Litens Pulleys: You’ll Be Surprised at What’s in the Box

What you get in the box may surprise you. This video is sponsored by Litens.