VIDEO: Brake Noise And Rotor Cleanliness

VIDEO: Brake Noise And Rotor Cleanliness

Andrew Markel answers a question about brake noise and how keeping parts clean can help prevent noise.

Andrew Markel answers a question about brake noise and how keeping parts clean can help prevent noise. Sponsored by Auto Value and Bumper To Bumper Parts Stores. Visit alliance1.com for more information.

Video courtesy Brake & Front End.

You May Also Like

Fuel Pumps and Cranking

Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.

Here is a diagnostic puzzle: An owner comes to your shop complaining that it takes longer than expected to start his car’s engine in the morning. There are no codes for the crankshaft and camshaft sensors. And, the oil pressure is within specifications. If you are lucky, you might have a code for low fuel pressure on the high side of the direct injection system. What could be the source of the problem?

Wheel Bearing Service Tips

When faced with any noise complaint, take the time to test-drive the car.

Navigating the Intricate Landscape of Coatings and ADAS

With refinish and ADAS, the theme time and time again comes back to: check the OEM repair recommendations.

Proper Paint Prep: Cleaning and Abrading

Nothing is faster or more profitable than doing the job one time.

How Battery Service Continues To Change

Your attention to a battery’s condition will tell you if it needs to be replaced – and with what.

Other Posts

Do EVs Require Special Brake Pads?

Proper brake pad selection is crucial for EVs to ensure consistent stopping power and long pad life.

Five Tips for your Next Wheel Bearing Job

These practical tips are designed to save you time and frustration, ensuring a smooth, noise-free outcome for your customers.

Educate Your Future Customers Utilizing AI

Discover how to generate quick, accurate explanations for repair orders and estimates, boosting your credibility and customer trust.

Catalytic Converter Replacement Rules

The conditions under which the catalytic converter was installed is of great importance to the part manufacturer.