VIDEO: Three Tips For Your Next Oil Filter Job

VIDEO: Three Tips For Your Next Oil Filter Job

Andrew Markel shares three tips to make sure your next oil filter installation job goes smoothly and prevents a comeback.

Andrew Markel shares three tips to make sure your next oil filter installation job goes smoothly and prevents a comeback. Sponsored by Auto Value and Bumper to Bumper.

Video courtesy Underhood Service.

You May Also Like

Spark Plug Replacement

Here are some tips to follow when replacing a spark plug.

Every time a spark plug fires, the spark burns a few molecules of metal off the plug’s electrodes. Over time, this eats away the electrodes and rounds off their sharp edges. The erosion gradually increases the gap between the electrodes, which, in turn, increases the firing voltage required to generate a spark. Eventually, the point is reached where the ignition system fails to produce enough voltage and the plug misfires.

Installing New Rotors

Knowing if and why there’s runout will help you reinstall a smooth braking system.

Oxygen Sensors And Catalyst Efficiency

Newer air/fuel ratio or wide-band sensors can detect a wide range of fuel conditions.

Multi-Link Front Suspensions

Why do some suspensions have so many ball joints? Here’s why.

BMW Driveshaft Q&A

Here are the top questions technicians ask about BMW driveshafts.

Other Posts

ADAS Calibration Tips

Here are 10 tips to follow during ADAS Calibration.

Smart Battery Management

Most modern systems will measure the internal resistance.

Fuel Pressure Diagnostics

Direct injection pressure is measured with sensors, and the signals are used to determine pump speed and/or volume.

Understanding Underhood Parts for Hybrids

Anything that can happen to an ICE in a standard vehicle can happen to an ICE in a hybrid.