Gasoline Direct Injection: Total System Diagnostics - Tomorrows Technician

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Tomorrow's Tech
Dedicated to Today's Automotive Students
Webinar

Gasoline Direct Injection: Total System Diagnostics

Speakers

  • Julio Ortego, Engineering Manager, Repair Products
  • Andrew Markel, Director of Technical Content, ShopOwner

Sponsored By Carter Fuel Systems

Date: October 19, 2022

Modern gasoline direct injection (GDI) engines have two fuel pump opportunities. You still have an electric pump in the tank, but a high-pressure fuel pump is on the engine. These two pumps work in unison, so the correct quantity of fuel is injected directly into the cylinder. If either pump can’t generate the pressure or volume commanded by the engine management system, it will cause driveability issues. In a 45-minute webinar, the experts from Carter Engineered Fuel Pumps will train you on how to diagnose the entire fuel system of a GDI vehicle.

You May Also Like

Webinar

Misfire and “Low Cylinder Contribution” Ignition Coil Diagnostics

You may have started to notice that there is a new type of misfire code, the “Low Cylinder Contribution” code. In this webinar, the experts at NGK’s Shop Squad will teach you how to look at misfires differently.

You may have started to notice that there is a new type of misfire code, the “Low Cylinder Contribution” code. In this webinar, the experts at NGK’s Shop Squad will teach you how to look at misfires differently.

View Webinar

More Webinars
Stop/Start Diagnostics

Stop/Start systems have been with us for more than a decade. In the final training session of the year from NGK’s Shop Squad, they cover how to troubleshoot the complexities of today’s modern stop/start systems.

Mastering Sensor Diagnosis with Waveform Analysis

Diagnosing a sensor requires observing the output voltage. A scope is the best tool for visualizing how the voltages change over time. In this 45-minute training session, our experts will discuss how to capture and evaluate sensor waveforms and values.

Preparing for Off Season: Tips and Tricks for Fluids in Your Motorcycles, Classics, Hot Rods, Muscle and Race Cars

Join this free upcoming webinar where we will delve into essential maintenance practices to ensure your prized machines remain in top condition during the cold months.

Direct Injection Diagnostics

Keeping pace with the changing technology for Gasoline Direct Injection (GDI) can be daunting for any technician. Join this webinar to learn diagnostic strategies for addressing evolving challenges in GDI systems.

Other Posts

Misfire Diagnostic Case Study

Join this free webinar to learn what can be performed in an hour of diagnostic labor when a vehicle comes into the shop with a misfire in cylinder #8.

Tips, Techniques and Tools for ADAS and EV/Hybrid Capable Wheel Hub Assemblies

Wheel hub assemblies are at the center of the two of the most revolutionary vehicle technologies disrupting shops, electrification and advanced driver assistance systems (ADAS).

Misfire Diagnostic Strategies

Some misfires don’t set codes, even though the driver and technician can feel a shudder or stumble. Where do you start? In this free webinar, learn how to replicate, isolate and resolve misfire complaints in less time with greater accuracy.

NGK Shop Squad Training: Scoping Secondary Ignition Waveforms

A secondary ignition waveform can tell a technician a lot about the condition of the coil, spark plug and even combustion chamber. Learn how to effectively use a scope and probes to view ignition system waveforms for practical diagnostics.