What's New With Functional Fluids? -

What’s New With Functional Fluids?

Late-model vehicle technology is changing. Wider tires, active safety systems and AWD technology are not only influencing how vehicles perform, but also the service and maintenance requirements of their functional fluids.

Late-model vehicle technology is changing. Wider tires, active safety systems and AWD technology are not only influencing how vehicles perform, but also the service and maintenance requirements of their functional fluids.

POWER STEERING FLUID

OE Interval: 60,000-100,000 miles

What has changed? Wider wheel and tire packages are putting more strain on power steering systems. More strain on the pump and rack means more heat. This heat can degrade the power steering fluid and eventually damage the seals and internal surfaces of the pump and rack.

Customers need to be aware there is no such thing as universal power steering fluid, as many models use specific formulations that are compatible with the seals in the system. A low fluid level is a sign that there is a leak. But, topping off with what is available at the gas station can do more harm than good, in some cases.

Some new power steering fluids on the market are designed to reduce the pump’s drag on the engine. If the wrong fluid is installed, it could damage the pump and the rack.

BRAKE FLUID

OE Interval: Based on the age of the fluid.

What has changed? ABS, ESC and traction control have become standard on most vehicles sold during the past decade. When the system activates to either release or lock a wheel, the hydraulic control unit’s valves can be hard on the brake fluid. The high pressure and force exerted on the fluid can degrade the fluid and also degrade the additive package and base stock.

The brake fluid is designed to have a specific viscosity, so when a valve opens the brake fluid flows as expected. But, water contamination and changes to the additive package can change the viscosity. In some cases, worn out brake fluid can cavitate and cause air bubbles in the fluid when it’s forced through the valves.

TRANSMISSION FLUID

OE Interval: 80,000-125,000 miles

What has changed? In the past, the fluid would be replaced only when the customer detected a change in how the transmission shifts. But, modern transmissions can mask worn fluid by changing shift points and line pressures. However, even the most sophisticated computer algorithm can mask worn out fluid for only so long. Eventually, the original fluid’s viscosity changes and depleted friction modifiers can damage the clutches and bands. This can destroy a transmission.

TRANSFER CASES AND DIFFERENTIALS

OE Interval: 60,000 to “lifetime”

What has changed? More vehicles are equipped with AWD transfer cases and differentials with electronically limited slip, locking and torque vectoring technology. They have new fluid requirements and service intervals, so ignoring a maintenance interval could lead to an expensive repair.

Some transfer cases and differentials have a lifetime factory fill and do not require service. If they leak and lose even a small amount of fluid volume, it can be catastrophic for the component.

Fluid requirements for these components can be very specific and require exact levels of friction modifiers to get the electronically actuated mechanical components to function properly.

Article courtesy Brake & Front End.

You May Also Like

Updating Your TPMS Tools Regularly Matters

You can ensure your read is accurate by updating your tool regularly.

Courtesy of Tire Review by Yanick Leduc

Picture this: Mark, an experienced tire service technician, is on the phone with a technical support representative from his TPMS supplier, inquiring why his new sensors don’t seem to work properly with the 2019 Silverado he’s servicing.

Mark: “The truck doesn’t seem to pick up the signal from the new sensor!”

Cabin Air Filters

Cabin air filters will protect the health and well-being of the driver and passengers.

Diagnostic Procedures For Stop/Start Systems

Stop/start technology is more than just a switch wired to the brake pedal and starter.

Brake Pad Wear Sensors

Brake pad wear sensors have been around for years and continue to evolve.

Topology and Your Scan Tool

Topology influences how you access the modules with your scan tool.

Other Posts

Ride Control Diagnostics From Tire Wear Clues

Learning how to read the tire and communicate your findings is the key to ride control service.

Understanding Engine Timing- Chains, Gears and Belts

Engine timing is critical for overall performance.

Air Filters and Fuel Trims

Modern engines rely on precise airflow and oxygen sensor data for optimal performance.

Mercedes Ignition Coil Pack Diagnostics

Replacing a single coil might not be the best approach to curing an engine of a chronic misfire.