Dodge/Chrysler Heater Hose "Y" Connector Prone To Cracking -

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Tomorrow's Tech
Dedicated to Today's Automotive Students
Automotive

Dodge/Chrysler Heater Hose “Y” Connector Prone To Cracking

Due to a high replacement demand, Gates engineers have developed a solution for the two-heater hose assembly "Y" connectors that are prone to cracking.

Tomorrow's Technician Staff
By Tomorrow's Technician Staff
Tomorrow’s Tech (TT) delivers technical information for servicing today’s vehicles to more than 40,000 automotive students enrolled in more than 1,100 technical and vocational schools across the country.
Published:

y-connector-1-300x193Models:

2008-2009 Chrysler Town & Country, 2008-2009 Dodge Grand Caravan

Related Articles

Due to a high replacement demand, Gates engineers have developed a solution for the two-heater hose assembly “Y” connectors that are prone to cracking. The “Y” assembly has been developed from a more robust 35% glass fill to ensure a stronger, more reliable component.

y connector 2The solution does not end with the more robust assembly, as both heater hoses are available individually without the rear steel heater tubes. This allows for time-saving maintenance or repairs to be performed due to the difficulty associated with installation of the steel tube placement.

Courtesy Gates Corporation.

You May Also Like

Automotive

ADAS False Activation Evolution

Since 2006, advanced driver assistance systems (ADAS) have evolved from active cruise control to autonomous driving controls.

Andrew Markel
By Andrew Markel
Published:

The average age of a driver in the US is 47 years old. If a driver started at 16, they have seen more than three decades of automotive technology changes. In 2008, ABS became a standard feature on most vehicles. By 2012, stability control, or rollover mitigation, had become standard for vehicles. Since 2006, advanced driver assistance systems (ADAS) have evolved from active cruise control to autonomous driving controls.

Read Full Article

More Automotive Posts
Crankshaft Counterweights And Balancing

Imbalance in the engine exhibits vibration and damage. Balancing becomes critical to any engine build.

By Eric Garbe
Diagnosing Misfires

What if there are no codes and a misfire is intermittent? This is where it gets complicated. 

By Andrew Markel
The Importance Of ADAS Calibrations

Following best practices and using appropriate equipment ensure customer satisfaction and safety.

By Joe Keene
Fuel Pressure Diagnostic Service

Use a scan tool that can look at special direct fuel injection parameters and perform bidirectional tests.

By Andrew Markel

Other Posts

Why Do Vehicles Go Out Of Alignment?

If camber, caster or toe are out of specifications, there is usually a reason why.

By Tomorrow's Technician Staff
Battery Charging and Diagnostics

Here are six tips to use when diagnosing a vehicle with a dead battery. 

By Tomorrow's Technician Staff
Diagnostic Strategies For Stop/Start Systems

This function of the power management system uses several modules to decide when the engine needs to stop and start.

By Andrew Markel
CVT Transmission Service

Like any automatic transmission, the condition and level of fluid in a CVT unit will determine the performance.

By Tomorrow's Technician Staff