VIDEO: Matching A Captured Waveform To The Correct Vehicle
Andrew Markel discusses how you can verify that a waveform you have captured is correct for the vehicle.
VIDEO: Brake Pad Placement For Wear Sensors
Andrew Markel explains how brake pads with wear sensors are installed and why only one way works.
VIDEO: TPMS Antenna On Rear Glass
Andrew Markel retells a story from a reader about how a TPMS issue was caused by the customer’s failure to mention the breaking of the rear glass.
VIDEO: Radiator Cap Diagnostics For Water Pump Or Radiator Leaks
Andrew Markel explains how replacing the radiator cap is critical to any water pump or radiator leak job.
VIDEO: Alternator Replacement: Tips To Perform The Complete Job
Andrew Markel offers several tips to keep in mind to make your next alternator replacement job long-lasting and reliable.
VIDEO: Things To Remember About Dual-Mass Flywheels
Recently, I did a video all about the dual-mass flywheel, a fantastic piece of machinery that works with the transmission to absorb vibrations, reduce noise, increase comfort, and save fuel, all while relieving the crankshaft and gearbox.
VIDEO: Two Tips For Knock Sensor Diagnosis
Andrew Markel introduces two tips for diagnosing knock sensors, including checking AC voltage and the possible induction of a “knock moment.”
VIDEO: Throttle-By-Wire And The Accelerator Pedal Position Sensor
In this Tech Minute, Andrew Markel shows how the accelerator pedal position sensor uses two sensors to create reliable readings in throttle-by-wire systems on modern vehicles.
VIDEO: Slow Or Lazy Oxygen Sensor Maintenance
Andrew Markel explains how coolant leaks and oil consumption can lead to a slow, lazy, or dead oxygen sensor.
VIDEO: Sway Bar Link Noise On Nissan Vehicles
Andrew Markel explains how sway bar geometry can lead to suspension noise on modern Nissan vehicles.
VIDEO: Five Tips To Diagnose Belt Noise
Andrew Markel shares five useful tips to diagnose and resolve belt noise, including twisting the tensioner, measuring the grooves, and ensuring the belt and pulleys are properly aligned.
VIDEO: Three Tips To Replace Exhaust Manifold Gaskets
Andrew Markel explains how exhaust manifold gaskets on some engines can be difficult to work with. The video also offers some pro tips to make the job easier, including using anti-seize and induction heating.
