Nickle and Dime Tech Tip
Bosch instructor Bob Pattengale talks about some best practices for inspecting an a/c compressor. Bob goes on to provide some tips on checking the a/c compressor clutch for proper air gap using both the feeler gauge method as well as the ‘nickel and dime’ method.
Technical Info Calls
George Witt talks briefly about how best to handle technical information calls that you might get from other shops. He talks about the importance of evaluating who you help, when and how often, and most importantly what info you should never reveal.
Service Advisor Tips and Tricks
In this tip clip George Witt gives advice on selling diagnostics to your customers. George talks about selling lists and inspections and how to present the diagnostic process in such a way that you are charging for your time, effort and expertise. He talks about the four ways this helps you in selling diagnostics and how to present the info in a way that leaves the customer happy and provides the info they need to make an informed decision.
Chrysler NGC: New Generation Computers
In this tech tip clip instructor Bill Fulton presents some need to know info on the Chrysler NGC PCM’s introduced in 2003. He talks about the fact that there are two different manufacturers for these computers and some issues related to interchangeability.
Chrysler Data Bussing: CCD, SCI Data Lines Tech Tip
Bill Fulton talks about Chrysler data bussing. Talking about CCD and SCI data lines and using bus circuit schematics from a 1998 Dodge minivan as an example Bill gives some in depth insights into the operation and relationships of Chrysler data bus circuits.
Honda Acura 5-Speed Bore Plug Tech Tip
In this transmission tip clip from the 2010 ATSG Seminar program Wayne Colonna presents some issues about bore plugs on Honda and Acura 5-speed transmissions. He talks about the resulting shift issues that can occur and ways you can fix the problem in such a way that comebacks are less likely.
Pressure Transducer Case Study: 2002 Explorer Misfire
Instructor John Thornton presents this in depth comprehensive case study of a 2002 Ford Explorer 4.0L vin E with a misfire at idle speed. John details the use of his scope and pressure transducer to perform a cranking compression test and goes on to point out the various indicators you should be watching your scope pattern for and how to identify problems.
A5 Brake Components Inspection Tip Clip
Watch this Tip Clip presented by instructor Mark DeKoster with information you need to know if you perform brake service and repairs. Mark shows us and talks about tips to determine if a rotor is acceptable to be turned and resurfaced, how to best prepare a rotor for being turned and best practices for reinstalling the rotor and other brake parts.
Bubba’s Garage
In this fun video clip Jim Linder presents some ‘teknical’ information you need to know if you work with ‘bubbas’.
J2534 Tech Tips
In this video Tip Clip Bob Pattengale presents information you need to know if you need to perform relearns after replacement of any vehicle components. He talks about how to do the research to determine if a relearn is needed and shows us how to best prepare for the relearn or reprogramming process.
NASTF Using Tech 2
Bob Pattengale demonstrates how to use the National Automotive Service Task Force’s website as a guide for flashing and reprogramming. He shows us how to use the NASTF website to learn how to navigate the OEM sites and prepare you for the job ahead.
GM Pass Key Systems Hands-On Tip Clip
In this video Tip Clip Bill Fulton presents several hands on test you can quickly and easily perform when diagnosing GM Pass Key antitheft issues and problems. Watch this video and learn to use your multimeter to check and diagnose the various components of the antitheft system.
