Tire Pressure Needs Closer Monitoring In Cold Weather

Tire Pressure Needs Closer Monitoring In Cold Weather

The Car Care Council recommends checking your tire pressure regularly during the winter to help keep the TPMS light off - and your vehicle safe.


Have you ever noticed that when the weather turns colder, the tire-pressure monitoring system (TPMS) light on your dashboard comes on more frequently?

The Car Care Council recommends checking your tire pressure regularly during the winter to help keep the TPMS light off – and your vehicle safe.

“It’s typical at this time of year for motorists to get TPMS warnings and then get worried about their tires,” said Rich White, executive director of the Car Care Council. “Often drivers will see this in the morning when it’s coldest. If the temperature warms, the light could turn off but it’s likely that tires will still be a few psi under-inflated. This is why it’s important to check tire pressure regularly.”

According to the U.S. Tire Manufacturers Association, for every 10-degree drop in temperature, tire pressure decreases 1 to 2 pounds per square inch (psi). Checking the tire pressure is important for vehicle safety, tire life and gas mileage.

Incorrect tire pressure can lower gas mileage by 0.3 percent for every 1 psi drop in pressure of all four tires and improve fuel efficiency by up to 3.3 percent when the correct tire pressure is maintained.

“Tire pressure should be checked at least monthly,” White said. “It is important to note that newer cars with tire-pressure monitoring systems may not alert you until the tire is significantly under-inflated, so you may want to check it more frequently. It is important to check tire pressure whenever there is a significant weather change and more often during the winter months.”

The Car Care Council is the source of information for the “Be Car Care Aware” consumer education campaign promoting the benefits of regular vehicle care, maintenance and repair to consumers. For a copy of the council’s Car Care Guide or for more information, visit carcare.org.

You May Also Like

ADAS Calibration Aborts

Troubleshooting the problem comes down to knowing the failure, vehicle or fixtures.

If you have invested in the fixtures and scan tools to perform ADAS calibrations, you know most systems will walk you through the entire process. But, what happens when you follow the directions and the process still won’t initialize or complete or a malfunction light comes on?

Understanding Differences Between Aluminum And Cast Iron

Sheer material differences aside, what are the features and benefits of aluminum and iron engine components?

Ford 3.5L EcoBoost Turbocharger Oil Leaks

Ford has revised the service information for the inspection and pinpoint tests of the turbocharger and oil lines.

ADAS False Activation Evolution

Since 2006, advanced driver assistance systems (ADAS) have evolved from active cruise control to autonomous driving controls.

Crankshaft Counterweights And Balancing

Imbalance in the engine exhibits vibration and damage. Balancing becomes critical to any engine build.

Other Posts

Diagnosing Misfires

What if there are no codes and a misfire is intermittent? This is where it gets complicated. 

The Importance Of ADAS Calibrations

Following best practices and using appropriate equipment ensure customer satisfaction and safety.

Fuel Pressure Diagnostic Service

Use a scan tool that can look at special direct fuel injection parameters and perform bidirectional tests.

Why Do Vehicles Go Out Of Alignment?

If camber, caster or toe are out of specifications, there is usually a reason why.