Audi: Passenger Compartment Not Warming Up? Code B10D004

Audi Tech Tip: Passenger Compartment Not Warming Up?

Code B10D004 will indicate a coolant circulation pump failure.

Models: 

A6/A7: 2012-2015 

A8/S8/S8+: 2014-2017

Bulletin: 191790

The customer may complain of a lack of heat in the passenger compartment even if the vehicle has been running for a long period. In the Climatronic control module, one or two DTC codes will be present. Code B10D004 will indicate a coolant circulation pump failure.

Code B11D501 indicates the supply voltage for terminal 30 of the coolant circulation pump has an electrical fault. 

To remedy the problem, the V50 coolant circulation pump needs to be replaced. 

You May Also Like

Oxygen Sensors And Catalyst Efficiency

Newer air/fuel ratio or wide-band sensors can detect a wide range of fuel conditions.

Article courtesy UNDERHOOD SERVICE.

No matter if it is a traditional oxygen sensor or air/fuel ratio sensor it measures the difference in oxygen levels between the outside air and the exhaust gases. By knowing the amount of oxygen in the exhaust gases, the engine management can control the amount of fuel injected into the engine for the best possible power, efficiency and emissions. 

Smart Battery Management

Most modern systems will measure the internal resistance.

Understanding Underhood Parts for Hybrids

Anything that can happen to an ICE in a standard vehicle can happen to an ICE in a hybrid.

Transmission Valve Body Replacement

Learning how to perform drivetrain diagnostics and “in-the-car” repairs is important.

Diesel Turbocharging Basics

There’s a reason diesels typically utilize compound turbo setups instead of twin turbochargers.

Other Posts

Audi Active Suspension Service

The key to servicing these systems is proper information and understanding precisely how these systems operate.

Testing A/C Or Heater Blower Motor Circuits

The heat eventually burns out the blower motor resistor, and, in many cases, causes the electrical connector to melt.

Toyota Steering Column “POP” Noise

Follow the repair procedures for a complete fix.

HVAC Diagnostics

Knowing the cause of the complaint might require looking at several components.