Changes In The TPMS Landscape Over The Past 10 Years
TPMS advancements today are focusing on coverage and programming speeds.
Hyundai/KIA A8LR1 Transmission With Code P0841
After the transmission was installed, trouble code P0841 “Transmission Fluid Pressure Switch A Circuit Range” was logged.
The Complete Shock And Strut Swap
One mistake to avoid when replacing struts is reusing the bearing plates or upper mounts.
Measuring Once Prevents Brake Comebacks
Runout is defined as the amount of lateral (side-to-side) movement of the rotor as it rotates 360 degrees.
Reducing Risks Of Damaging Tires, TPMS Sensors And Rims
Breaking beads with rollers can prevent TPMS Sensor damage. Also, never use a bead shovel near a TPMS sensor.
DIY YouTuber ChrisFix Shows Benefits Of Galvanized Brake Pads
With the world’s largest automotive DIY channel on YouTube, ChrisFix helps people across the world with car issues.
Brake Lines: What Is The Right Solution?
Inspecting brake lines should be part of every vehicle inspection.
Brake Job: 2018-Current Honda Odyssey
Using a low-quality brake pad or reusing the abutment clips can lead to a noise comeback.
Alignment Specs: 2009-2013 Subaru Forester
The camber is adjustable from the factory with a cam bolt in the strut flange. Caster is non-adjustable.
Brake Job: 2010-2019 Ford Fiesta
The front brakes are the conventional single-piston floating caliper design.
Alignment Specs: 2002-2010 Jeep Liberty
The control arms are robust, but the stock ball joints proved to be this vehicle’s weak link early in its life.
Brake Pad Confusion: What Is The Best Brake Pad?
What makes one friction material quieter or better than another? It’s a two-part answer.
