Should the axle nut be replaced when a new wheel bearing or CV joint is replaced? Andrew Markel discusses when to replace the axle nut as well as the proper torque procedure when using an axle nut socket. Sponsored by BCA Bearings.
Video courtesy Brake & Front End.
No matter if it is a BMW or MINI, when the engine stops turning, the oil flowing to the turbocharger stops.
In 2006, BMW modified the MINI Cooper from having a supercharged engine to a turbocharged engine. The supercharger had issues with internal wear that could cause bearings and gears to fail. The turbocharger has proved to be more reliable. But, as the years have passed, the one problem that has surfaced is what can happen when the owner does not maintain their vehicle with regular oil changes.
This function of the power management system uses several modules to decide when the engine needs to stop and start.
The systems goal has remained the same over the: maximizing traction by sending power to all four wheels.
The parking brake and hydraulics are where you’ll find any service issues.
Engine timing is critical for overall performance.
Converters must be certified and labeled with the correct codes that are stamped into the shell when replacing.
The key to servicing these systems is proper information and understanding precisely how these systems operate.
Tesla’s air suspension is “smart” because it uses GPS information and vehicle speed to adjust suspension ride height.
Trying to make do with a battery charger or jumper pack can cost you more than the price of a reflash power supply.
