Always Vacuum Before Replacing Air Filters (Video)

Always Vacuum Before Replacing Air Filters (VIDEO)

When replacing an air filter, why would a vacuum be the most essential tool? This video is sponsored by FRAM.

One of the most essential tools for replacing an air filter is not a screwdriver or 10mm socket, it is a vacuum cleaner. Outside of the air filter housing, dirt and leaves can accumulate. These need to be removed before the cover to the air filter is removed for inspection.

Inside the air filter housing, larger pieces of leaves and even rocks could be at the bottom. You may even see accumulations of sand. When the old filter is removed, debris trapped in the pleats can fall into the housing

Rodents love to store food in the housing and even make it into a home. Chipmunks like to store nuts, while mice prefer pet food. As for bedding materials, mice and chipmunks love to destroy hood liners for a soft, comfortable bed like on this Toyota.

If there is pet food, advise them that they may need a new method to store cat or dog food in the garage. Using a vacuum to remove this stuff housing will give a new filter a longer life.

As for keeping the rodents from nesting, the jury is still out on this one. Some remedies include Irish Spring soap, dryer sheets and pine-scented air fresheners stashed under the hood. Some online gurus even advise spraying the tires with deer scent. You can leave this part up to the customer.

This video is sponsored by FRAM.

You May Also Like

How The Vehicle Cooling System Functions

Here’s what to know to clarify cooling questions you’re asked at the service counter. This video is part of The Group Training Academy.

Automotive cooling systems are complex and composed of several components working together to regulate engine temperature. And let’s be frank – customers expect everything to work flawlessly. Here’s what you should know to clarify questions you’re asked at the service counter.

The primary function of a cooling system is to dissipate excess heat generated by the engine during combustion. This heat, if not properly managed, can cause overheating, leading to engine damage and potential breakdowns.

2 Wheels 2 Ways Ep. 5

Some last-minute riding out West leads the team to AIMExpo 2024 for an excellent trade show!

Not All Coolants Are Equal – Or Appropriate

Today’s modern engines put an even greater emphasis on unique cooling requirements. This video is part of the Group Training Academy.

Optimize Tesla Performance With E-Fluids

Learn the differences between ‘wet’ and ‘dry’ e-axles. This video is sponsored by CRP Automotive.

Understanding Fuel Trims

The fuel trims are what govern what’s going on inside the engine. This video is sponsored by Auto Value and Bumper to Bumper.

Other Posts

Checking The Auxiliary Water Pump

A car or truck comes into the shop with a complaint of poor heater performance. The issue may be the auxiliary water pump.

Tech holds up heater core
Manual Clutch Repair and Diagnostics

If the clutch gets too hot from excessive slippage or loading, the linings may burn, damaging the clutch.

Fuel Pressure Diagnostics

Direct injection pressure is measured with sensors, and the signals are used to determine pump speed and/or volume.

Diagnostic Procedures For Stop/Start Systems

Stop/start technology is more than just a switch wired to the brake pedal and starter.