Ford Explorer Rear Toe Link Corrosion Problems And Failures
A seized toe link ball joint can increase bending stresses in the toe link outboard of the turnbuckle.
Alignment Specs: 2002-2010 Jeep Liberty
The control arms are robust, but the stock ball joints proved to be this vehicle’s weak link early in its life.
VIDEO: A Suspension Inspection Lesson
There is no such thing as a casual suspension inspection. The safety of the driver depends on the condition of the tie rods, ball joints and other suspension components.
Installing Torque-To-Yield Suspension Components
What do some ball joints, tie rods and suspension components have in common with engines? The answer is Torque-to-Yield (TTY) fasteners.
Ride Control: 15 Tips To Sell The Job And Do It Right
The customer will not be happy if he brought the car in for a knocking noise, was sold a couple hundred dollars worth of struts and/or ball joints, etc., and the noise is still there. If he then takes the car elsewhere and the knocking noise is fixed with a couple of $20 sway bar bushings, that guy is going to think he got beat. This underscores the importance of addressing the customer’s complaint before that vehicle leaves your shop.
Busted Knuckles: Bearings And Seals For Monobeam Front Axles
Servicing the ball joints and U-joints on monobeam axles requires a fair amount of steering knuckle disassembly just to access these components.
Torque-To-Yield Suspension Components
What do some ball joints, tie rods and suspension components have in common with engines? The answer is torque-to-yield (TTY) fasteners.
Needs Come First When Choosing Aftermarket Or OE
It’s essential to understand the differing needs of manufacturers, shops, technicians, and consumers.
Service Opportunities Still Exist With EVs
Like all ICE vehicles, you need the correct tools, parts and to follow the proper service procedures when servicing EVs. This video is sponsored by The Group Training Academy.
Why Do Vehicles Go Out Of Alignment?
If camber, caster or toe are out of specifications, there is usually a reason why.
