Repair VS. Replace: Your Checklist For Tire Equipment
Use this checklist as a guide next time you need to determine if you should repair or replace your tire service equipment.
Servicing Tires With 18-In.-Plus Rims
Servicing any tire and wheel assembly correctly starts with having the right equipment.
Diagnosing Audi A8 TPMS Issues
These are all the steps you’ll need to pinpoint fault issues in TPMS for 2009-2016 Audi A8 vehicles.
Snap-on Products To Help Technicians Help Customers
Common tools and equipment for spring car care.
Road To Indy Presented By Cooper Tires Goes Virtual
Cooper supplies data to enable realistic racing experience amid coronavirus season delay.
VIDEO: You’re Entering The Irregular Tire Wear Zone
Check out this ‘On The Road’ video to learn about irregular tire wear. This video is sponsored by Chevron.
Honda Tech Tip: Low Tire Pressure And TPMS Indicator On After Recent Tire Replacement
The Honda CR-V uses an indirect TPMS system that uses the rolling circumference of the tire to determine the pressure in the tire.
10 Alignment Tips To Help You See Past The Angles
Suspension angles are dynamic. As the body moves, the camber, caster and toe will change in the front and rear. OEMs tune these angles for the best tire wear and stability at a set ride height. If a spring is weak or missing a coil, the alignment angles will be off from these calculations.
Specialty Wheel Alignments And Parts
While the alignment is perfect when it rolls out of the factory, what happens when it starts to age and the body and cradle start to settle?
Hyundai Alignment: Curing ‘Drift And Pull’ Conditions
Drift/pull conditions occur at all speeds. But, the amount of force on the steering wheel or steering angle will increase with speed. If the customer states the drift/pull problem is sporadic, the cause could be the stability control system, or the electric or hydraulic power steering system.