Kia Tech Tip: New Part Cures EVAP Leaks -

Main Navigation

Advertisement
Social Connect
Resources
Our Brand Family
Tomorrow's Tech
Dedicated to Today's Automotive Students
Automotive

Kia Tech Tip: New Part Cures EVAP Leaks

Working on a Kia Rio? There's a new part that cures EVAP leaks on 2012-2017 Rio models.

Tomorrow's Technician Staff
By Tomorrow's Technician Staff
Tomorrow’s Tech (TT) delivers technical information for servicing today’s vehicles to more than 40,000 automotive students enrolled in more than 1,100 technical and vocational schools across the country.
Published:

Models
2012-2017 Rio

Related Articles

This bulletin provides the procedure to replace the Canister Close Valve (CCV) on some 2012- 2017MY Rio (UB) vehicles, produced from June 21, 2011, through March 28, 2016, which may exhibit the engine warning lamp DTCs P0455 and P0456 for an evaporative emission system leak due to the Canister Close Valve (CCV) stuck open.

The Canister Close Valve (A) is a separate part from the Fuel Tank Air Filter assembly (B) where it is inserted.

Follow the procedure outlined in this bulletin to replace the CCV with an improved part. Before conducting the procedure, verify that the vehicle is within the affected production date range.

The rubber seal material has changed from black to tan.

Article courtesy Underhood Service.

You May Also Like

Automotive

JEEP Steering Shimmy Solution

Replacement of the steering damper with AE level or newer is recommended.

Tomorrow's Technician Staff
By Tomorrow's Technician Staff
Tomorrow’s Tech (TT) delivers technical information for servicing today’s vehicles to more than 40,000 automotive students enrolled in more than 1,100 technical and vocational schools across the country.
Published:

Wrangler 2017-Newer

If a driver complains of a shimmy in the steering wheel after hitting an irregularity in the road surface such as an expansion joint, pothole or bump. Replacement of the steering damper with AE level or newer (AE will be the last two position of the steering box part number) is recommended. Vehicles built after 4/9/2019 are equipped with the new design damper.

Read Full Article

More Automotive Posts
Brake Problems

Reducing brake drag on late-model vehicles is not accomplished by a single component; it takes a system.

By Andrew Markel
Transmission Valve Body Service

Four basic items are necessary to start your own reprogramming ventures.

By Tomorrow's Technician Staff
Fuel Pumps and Cranking

Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.

By Andrew Markel
ADAS and Vehicle Alignment

New vehicle ADAS features all rely on the alignment being exactly as it should be.

By Tomorrow's Technician Staff

Other Posts

PCV System DTC

PCV systems control crankcase pressure.

By Tomorrow's Technician Staff
A/C Condenser Clogs

When a compressor fails, the question for most technicians is whether to flush the condenser or replace it.

By Tomorrow's Technician Staff
ADAS False Activation Evolution

The logic behind most ADAS warnings or corrections is to examine the plausibility of the situation.

By Tomorrow's Technician Staff
Checking The Auxiliary Water Pump

A car or truck comes into the shop with a complaint of poor heater performance. The issue may be the auxiliary water pump.

By Andrew Markel
Tech holds up heater core