VIDEO: Spark Plugs And Engine Noise

VIDEO: Spark Plugs And Engine Noise

Do you know the difference between detonation and pre-ignition? This video is sponsored by Autolite.

Technician A says engine knocking noise heard only during acceleration can be caused by worn engine bearings.

Technician B says engine knocking noise only during acceleration can be caused by ignition problems.

Who is right?

It is technician B!

Spark knock, which is caused by uncontrolled combustion, sounds like a metallic pinging noise. Spark knock may be heard under a heavy load or on acceleration.

Detonation occurs when combustion of the air/fuel mixture in the cylinder starts off correctly in response to ignition by the spark plug, but one or more pockets of the air/fuel mixture explode outside the envelope of the normal combustion. The collision of the two flame causes a pinging noise. This can be caused by:

• Fuel with too low of octane rating
• Ignition timing that is too far advanced
• High engine operating temperature or
• Excessive carbon build-up in the combustion chamber

Pre-ignition can also be caused by carbon deposits in the combustion chamber. But this is different from detonation. Pre-ignition occurs when the air/fuel mixture prematurely ignites before the spark plug fires. Then the spark plug ignites the remaining mixture at the normal time. When the two portions of the burning mixture meet each other, there is a sudden abnormal rise in-cylinder pressure causing engine vibration and pinging or knocking noise. This can be caused by:

• Hot spots in the combustion chamber
• Incorrect heat range spark plug or
• Carbon deposits in the combustion chamber

Knowing the difference between detonation and pre-ignition can help you diagnose vehicles on the ASE G1 and in real life. This video is sponsored by Autolite.

You May Also Like

Oil Filter Housing Weak Points & Standard® Solutions

Engineers at Standard® have created a completely assembled Oil Filter Housing Kit.

The oil filter housings on Chrysler Pentastar 3.6L engines frequently encounter oil leaks in several areas. Engineers at Standard® have assessed these weak points and created a completely assembled Oil Filter Housing Kit that features multiple improvements over the original to prevent leaks.

Tesla Model 3 TPMS Service

Resetting and programming TPMS sensors for a Tesla is a lot like any other vehicle, and the challenge is still the same: keeping the light off.

Can You Jumpstart an EV?

First thing’s first: Find the LV battery, which could be anywhere in the vehicle.

Understanding What Antifreeze/Coolant Actually Does

Today, each manufacturer has its own formula for best results in their vehicles. This video is part of the Group Training Academy.

How The Vehicle Cooling System Functions

Here’s what to know to clarify cooling questions you’re asked at the service counter. This video is part of The Group Training Academy.

Other Posts

Knock Sensor Diagnostics

The knock sensor is not the only sensor responsible for detecting engine knock.

ECM Damage

Engineers have devised two strategies that can be called the “immune system” for the electrical system.

It’s Got Spark!

Why can’t you trust some spark tests?

Understanding Differences Between Aluminum And Cast Iron

Sheer material differences aside, what are the features and benefits of aluminum and iron engine components?