Vehicle Visibility Options

Vehicle Visibility Options

Headlights aren't the only lighting issues you may face. This video is sponsored by The Group Training Academy.

Lighting options in today’s cars are more varied than they’ve ever been. For many reasons, traditional replaceable halogen bulbs are not the only things you may face in the service bay.

According to Philips, headlight bulbs begin to project significantly less light within two to three years of their initial usage, producing dimmer light outputs that compromise the safety of drivers and their passengers.

In addition, as headlight lenses age, the effects of exposure to sunlight, ozone and road debris can significantly reduce their transparency. This, combined with aging filaments, means headlights won’t cut through the night like they used to.

Regardless of which bulb your customers’ headlights require, one of the best solutions for old, hazy headlight lenses is to use a headlight restoration kit. Having a brighter bulb won’t solve the problem of poor light dispersion caused by hazy lenses.

As a technician, you’ll face more than just headlights. Many of your customers may be installing LED upgrades in their vehicles’ signaling and fog light applications. They’re rugged, they last far longer than conventional bulbs, and they can offer brilliant illumination. In addition, they offer a unique high-tech style that can really set a vehicle apart. However, this warning MUST be remembered: while LED upgrades are OK for all off-road applications, for on-road use they’re only for fog-light applications. They’re simply not designed to be used in headlight applications.

And for all the customization and durability an LED light may offer, a do-it-yourself installation may introduce another unintended problem.

In use, LED lights can trigger a false bulb failure warning or “fast flashing” condition. Some cars use the CANbus to send electric impulses to verify the functioning of a bulb. Because LED bulbs have a lower wattage and draw much less power than conventional incandescent bulbs, when the system runs a check, the electrical resistance of LEDs are too low compared to halogen bulbs and the CANbus creates a false warning that one of the lights has failed.

This can also cause the vehicle’s turn signals to fast flash due to the lower resistance of the LEDs.

In some rare cases, installation of an LED bulb can cause an even scarier problem. Instead of finding the higher resistance of an incandescent bulb, the car’s computer detects a problem that causes the car to go into “Limp Home” mode.

If your customers are experiencing such problems as a result of installing LED bulbs in place of incandescent bulbs, a Philips Ultinon CANbus Adapter can be a simple, easy-to-install solution. Available in 5W (for interior applications and license plate lighting) and 22W (for exterior applications), the adapter provides the resistor value the vehicle computer expects to see.

If your customer complains of a dashboard “bulb out” error message after installing an LED light, installation of a Philips Ultinon CANbus Adapter in the circuit can eliminate this problem. Installation takes only minutes and requires only a pair of pliers.

There’s a chance your customers will do lots of things they shouldn’t do if their vehicles aren’t perfect. They may drive with a check engine light on. They may drive with their brakes squealing. But if their headlights are out, they’ll have a tough time going anywhere. Help them see the light.

For more information on proper headlight and signal bulb selection, visit

This video is sponsored by The Group Training Academy

You May Also Like

Gear Ratios and Vehicle Performance

Just remember, there is no perfect gear ratio.

Have you ever wondered in a rear-wheel-drive vehicle how the engine spinning in the center of the car can spin the wheels that are perpendicular to the engine?

Well it is a mystery how that happens. Additionally in that same space we change the ratios of revolutions and the torque available to spin everything.

Ignition System Components: Coils, Modules and Spark Plug Wires

Learn how spark plugs, ignition coils, and ECM controls work together to ignite the air-fuel mixture and keep your engine running smoothly.

LED Work Lights for Automotive Repair and Maintenance

LED lighting has been a game-changer for illumination in the workplace and at home.

Sway Bars and Linkages

The basic operation of a sway bar is quite simple.

Choosing the Right Power Steering Fluid

Learn what power steering fluid is, why it’s crucial for your vehicle, and how to choose the right type.

Other Posts

Are Modern Cars with ADAS Really Safer?

Studies suggest that ADAS technologies can significantly reduce the likelihood of accidents and injuries on the road.

High-Pressure GDI Fuel Pumps

When solving a fuel pump issue, the scan tool is your best friend.

Tool Intel – Understanding Air Tool Fittings and Couplers

Here’s a guide to identifying the most common sizes and style of air fittings found in most automotive shops.

Troubleshooting Remote Keyless Entry and Vehicle Starting Issues

Learn how key rings, RFID chips, and other factors can affect your vehicle’s security system and learn to resolve these problems.