Part 3 of a Society of Collision Repair Specialists (SCRS) video series on welding emphasizes protective measures that shops and technicians must take to stay safe during welding procedures.
Safety measures include proper welding helmets, protective gloves, fume extractors and screens.
The association unveiled the video at its July 24 open Board of Directors meeting in Chicago.
The video features SCRS members Michael Bradhsaw, Andy Dingman, Toby Chess and Dave Gruskos.
Poor clutch release makes it difficult to start and stop the vehicle or change gears.
“No release” is probably the most common of all clutch problems. The purpose of the clutch is to couple and decouple the engine and transmission. Poor clutch release makes it difficult to start and stop the vehicle or change gears.
Common Clutch release problems
Air in a hydraulic release system;
The first thing you need to realize is that no seal is perfect.
Replacement of the steering damper with AE level or newer is recommended.
Reducing brake drag on late-model vehicles is not accomplished by a single component; it takes a system.
Four basic items are necessary to start your own reprogramming ventures.
Diagnosing the problem comes down to understanding what causes a loss of fuel pressure.
New vehicle ADAS features all rely on the alignment being exactly as it should be.
PCV systems control crankcase pressure.
When a compressor fails, the question for most technicians is whether to flush the condenser or replace it.
