VIDEO: Should I Tighten An Axle Nut With An Impact?
Andrew Markel explains why you should hand-tighten an axle nut, and how an impact could damage the CV axle or bearing.
VIDEO: Should Axle Nuts Be Reused On A New Hub Or Axle?
Should the axle nut be replaced when a new wheel bearing or CV joint is replaced? Andrew Markel discusses when to replace the axle nut as well as the proper torque procedure when using an axle nut socket.
Busted Knuckles: Bearings And Seals For Monobeam Front Axles
Servicing the ball joints and U-joints on monobeam axles requires a fair amount of steering knuckle disassembly just to access these components.
Mercedes-Benz: Axle Hub Vibration And Judder From Corrosion
It is imperative that when installing brake discs (front or rear) that any excessive corrosion/scaling which may have developed on the axle hub be removed.
Tech Tip: FIAT 500 Rear Axle Alignment
Rear axle alignment shims are available in a kit containing two shims and replacement spindle mounting bolts. The front shim is used to correct an out of specification toe-in condition, and the rear shim is used to correct an out of specification toe-out condition.
Live-Axle Wheel Bearing Replacement
Replacing wheel bearings on a vehicle with a live rear axle may not be one of the most frequent jobs, but it can be one of the most profitable. While the basics have not changed in more than 60 years, new seal materials and differential designs have added new wrinkles.
Driveshaft Diagnostics
The big challenge with late-model vehicles is the diversity of driveshafts.Â
Audi Quattro
The system’s goal has remained the same over the years: maximizing traction by sending power to all four wheels.
Eaton to Supply ELocker Differential System to EV Manufacturer
The system leverages an electric motor to power the rear wheels and an electric motor or an optional ICE driving the front wheels.
Chassis Parts and Alignment Angles
Knowing why the adjustment is required is critical to performing the total alignment.
