Ranger Introduces CoolCharge A/C Recharging Machine

Ranger Introduces CoolCharge A/C Recharging Machine

The AC-134 CoolCharge A/C recharging machine services most cars, trucks, SUVs and buses.

Ranger’s new AC-134 CoolCharge air conditioning recovery, recycling and recharging machine is a cost-effective, fully automatic A/C machine for servicing most cars, trucks, SUVs and buses. In less than an hour, the CoolCharge machine can fully clean, recover and replace refrigerant in a vehicle’s A/C system.

The machine evacuates and recovers virtually 100 percent of existing coolant and recharges vehicle A/C systems so they work like new again. For A/C systems that just need to be cleaned, the machine can easily flush the existing refrigerant through filters to clean it and return it to the system. Both functions can be performed with minimal technician oversight for maximum efficiency. The automatic CoolCharge is programmable so once the machine is started, techs can work on other projects during the A/C system recharge and recovery process.

The portable and easy-to-use CoolCharge machine is intuitive during the recharging process to make sure nothing goes wrong. The filter quality and refrigerant levels are also automatically monitored by the machine. Functions will cease in the event the filter is too dirty or the refrigerant level becomes too low to service the vehicle. 

For more information about the AC-134 CoolCharge A/C recovery machine, call (805) 933-9970 or visit bendpak.com/shop-equipment/ac-recovery-machines/ac-134-coolcharge.

You May Also Like

Milwaukee Debuts Next-Gen M18 FUEL ½″ Impact Wrenches

Next-gen delivers more power, speed & durability in application while maximizing ergonomics with light and compact designs.

Milwaukee Tool continues to challenge expectations of cordless performance with the introduction of the next generation of M18 FUEL ½″ High Torque Impact Wrenches. Designed for the trades with the power of M18 FUEL technology, these High Torque Impact Wrenches deliver more power, speed and durability in application while maximizing ergonomics with light and compact designs.  

Milwaukee Debuts New In-Ear Audio Solution

Built to survive on the jobsite, this wireless audio solution is water, dust, and impact resistant.

MARTINS Introduces Premium Stud and Hub Cleaning Tools

Made in one-piece, the Stud and Hub cleaning tools are built to withstand the rigors of everyday use.

Ingersoll Rand D5241 IQV20 Hammer Drill   

Three modes, 24 clutch positions provide versatility, precision, durability with cordless freedom.

Killer Tools & Equipment Introduces New Hole Punch Kit

The new 14 piece Bumper Perfect Kit punches holes for an OEM look.

Other Posts

A/C Condenser Clogs

When a compressor fails, the question for most technicians is whether to flush the condenser or replace it.

BendPak Founder Don Henthorn Passes Away

Grew company from small machine shop to global leader in car lifts and garage equipment.

Tesla Model 3 TPMS Service

Resetting and programming TPMS sensors for a Tesla is a lot like any other vehicle, and the challenge is still the same: keeping the light off.

Can You Jumpstart an EV?

First thing’s first: Find the LV battery, which could be anywhere in the vehicle.