Andrew Markel explains why you should hand-tighten an axle nut, and how an impact could damage the CV axle or bearing. Sponsored by BCA Bearings.
Video courtesy Brake & Front End.
Andrew Markel explains why you should hand-tighten an axle nut, and how an impact could damage the CV axle or bearing. Sponsored by BCA Bearings.
Video courtesy Brake & Front End.
Misfire faults have been related to conditions like loose/damaged electrical connections, poor circuit grounds and more.
All Models (Except Routan) 2008-2017
Customer may state that the MIL is flashing or illuminated. The engine performance may be reduced without a significant loss of power or a consistent misfire condition. One or more of the following DTCs are stored in the ECM fault memory:
Nominations are being accepted for the 2024 Byrl Shoemaker/ASE Education Foundation Instructor of the Year award.
The Gandia Group is a full line distributor of automotive aftermarket parts and accessories in San Juan, Puerto Rico.
The campaign aims to raise $65,000 through 1,000 donations of $65 each.
Report shows advanced technology is contributing to costlier repairs, higher claims costs and longer cycle times.
The knock sensor is not the only sensor responsible for detecting engine knock.
There are some myths about brake pads, rotors and hydraulics that need to be busted.
Here are some common problems or failures that you should be on the lookout for.
Reflashing and reprogramming is a necessary service for repairing vehicles.